
Reliable water-soluble polymers China Manufacturer
- Email:info@upschem.com
- TEL : +86-532-5800-1818 (24 Hours)
Mineral dressing is a process of mechanically separating the grains of ore minerals from the gangue minerals, to produce a concentrate (enriched portion) containing most of the ore minerals and a tailing (discard) containing the bulk of the gangue mineralsThe first process most ores undergo after they leave the mine is mineral dressing(processing), also called ore preparation, mineral dressing or ore beneficiation. Mining chemicals are widely used for this process. UPSCHEM offers a series of product, which is widely used as flocculant to solid liquid separation in thickener, and used as flocculant for dewatering on filter press or in centrifuge.
After the coal is mined and sized it is then ground down by ball mills and then separated from the waste by gravity in a medium of water. The coal floats and the waste sinks with the subsequent coal again sized and separated into the finished product.
During the process fine coal articles are generated which require further processing to recover these fine coal articles. This is normally achieved by a flotation process where flotation agent is added to promote the separation of the coal from the waste. Again the coal floats and the waste sinks.
The fine coal is then recovered by sedimentation and then by filtration or centrifugation. UPSCHEM flocculant and coagulant are used in the sedimentation process to promote solid liquid separation and subsequent rapid settlement in the thickeners so by producing clean water from the overflow of the thickeners for recycling back to the preparation plant. The fine coal, which settles, is subsequently recovered by the filtration/ centrifugation as the fine grade coal product. Again during the filtration/ centrifugation process UPSfloc is added to enhance the separation process.


High Suspended Solids
Tailings and process water often contain large amounts of fine particles that settle slowly.
Low Water Recovery
Poor separation efficiency can increase freshwater consumption and disposal costs.
Sludge Handling Difficulties
Large sludge volumes require effective thickening and dewatering solutions.
Regulatory Compliance
Environmental regulations require effective treatment before discharge or reuse.
Variable Water Quality
Different ores and processing methods create changing treatment requirements.
| Polyacrylamide Flocculants | Coagulants | |
|---|---|---|
| Description | Polyacrylamide (PAM) is widely used to improve sedimentation and solid-liquid separation. | Coagulants destabilize suspended particles and improve the performance of downstream flocculants. |
| Typical Applications | Tailings thickeningClarifier operationsMine wastewater treatmentCoal washing plantsMineral concentration processes | Raw water clarificationProcess water treatmentTailings water treatmentHeavy metal removalIndustrial wastewater treatment |
| Key Benefits | Faster settling ratesImproved water recoveryReduced sludge volumeLower operating costsEnhanced filtration performance | Improved clarification efficiencyReduced turbidityEnhanced floc formationLower chemical consumption |
Increased Water Recovery
Recover more process water for reuse and reduce freshwater demand.
Improved Thickener Performance
Achieve faster settling and better underflow density.
Reduced Chemical Consumption
Optimize treatment efficiency with properly selected products.
Lower Disposal Costs
Reduce sludge volume and tailings handling expenses.
Regulatory Compliance
Support environmental discharge and recycling requirements.
Technical Support
Our specialists help identify suitable products based on ore type, water quality, and process conditions.
UPSCHEM’s core competence is our high quality products with sustainable providing capacity. Welcome to contact us & we are ready to serve you.